ARZU GÖNENÇ SORGUÇ

Tel : +903122104209
web : www.http://arzugonencsorguc.me | dds.archweb.metu.edu.tr
e-mail : arzug@metu.edu.tr
office : METU Department of Architecture, room 59 / room 4B (Digital Design Studio)
METU Design Factory (tf.metu.edu.tr)

Professor | Mechanical Engineer | B.Sc. | M.Sc. | Ph.D.

acoustics and noise control | computational design and fabrication technologies | biomimetics and computing | structural systems and design | environmental technologies | generative systems

Background
2016 – Present Director of the Center
METU Design Factory
2016 – Present Professor
Middle East Technical University, Department of Architecture
2015 – 2020 Vice Dean
Middle East Technical University, Faculty of Architecture
2008 – 2016 Assoc. Professor
Middle East Technical University, Department of Architecture
2009 – 2015 Program Coordinator
METU Computational Design and Fabrication Technologies in Architecture
2007 – 2010 Vice Chairperson
Middle East Technical University, Department of Architecture
2001 – 2009 Assist. Professor
Middle East Technical University, Department of Architecture
1998 – 2001 Instructor
Middle East Technical University, Department of Architecture
1997 – 2012 Visiting Professor
Tokyo Institute of Technology, Japan
1998 – 2000 Vice President of Information Technology Group
METU MATPUM: Research and Implementation Centre for Built Environment and Design (RICBED)
 1998 Post-Doctoral Studies
Tokyo Institute of Technology, Japan
 1997 Doctor of Philosophy, Mechanical Engineering
Department of Mechanical Engineering, METU, Ankara
 1989 – 1997 Research Assistant
METU, Department of Mechanical Engineering, Ankara
 1991 Master of Science in Mechanical Engineering
Department of Mechanical Engineering, METU, Ankara
 1988 Bachelor of Science
Department of Mechanical Engineering, METU, Ankara

Awards
2016 METU Incentive Premium for Performance
2013 METU Incentive Premium for Performance
2006 METU Incentive Premium for Performance
2000   METU Incentive Premium for Performance
2000 Centennial fellowship of Tokyo Institute of Technology

FELLOWSHIPS
1996-1997 Technical University of Delft by NATO scholarship during her PhD studies
1998-2012 Tokyo Institute of Technology, Postdoc studies and after in several occasions. (2008 VBL Fellowship of Japan Science Foundation, 2002, 2003 VBL Fellowship of Japan Science Foundation, 2000 Centennial fellowship of Tokyo Institute of Technology,1998, 1999 Tokyo Institute of Technology Fellowship)
2015 Invited researcher Tokyo Institute of Technology, Department of Mechanical Engineering, Tokyo Japan (December 18-27 2019)
2016 Invited researcher Tokyo Institute of Technology, Department of Mechanical Engineering, Tokyo Japan  (January 5-15 2016)

COURSES
2021 – Present BS725 | Folding in Architecture
2020 – Present BS 723 | Introduction to Machine Learning in Architecture 
2020 – Present BS 724 | Nature-informed Computational Design in Architecture
2012 – Present ARCH 203 Digital Media I (with İpek Gürsel Dino)
2013 – Present BS 770 Digital Fabrication, METU, Department of Architecture.
2012 – Present ARCH 439 History of Modern Structures, METU, Department of Architecture.
2010 – 2011 ARCH 332 Structural Design II (with Halis Günel), METU, Department of Architecture.
2009 – Present ARCD 501, Computational Design Studio (with İpek Gürsel Dino (since 2012)) METU, Department of Architecture.
2009 – Present ARCD 511, Research in Computational Design (with İpek Gürsel Dino (since 2012)) METU, Department of Architecture.
2008 – Present ARCH 361 Integration of Building Systems in Architectural Design for Environmental Control, METU, Department of Architecture.
2007 – Present ARCH 479 Acoustics of Performance Halls, METU, Department of Architecture.
2007 – 2011 ARCH 232 Structural Analysis, (with Joseph Kubin), METU, Department of Architecture.
2007 – 2011 ARCH 231 Statics, (with Joseph Kubin), METU, Department of Architecture.
2007 – 2010 IS 100 Introduction to Programming, (with Mine Özkar), METU, Department of Architecture.
2006 – Present Arch 333 Mathematics in Architecture, METU, Department of Architecture.
2006 – Present Arch 475, Digital Design Studio II (with first Şebnem Yalınay Çinici, then Mine Özkar, and 2012-İpek Gürsel Dino) METU, Department of Architecture.
2004 – Present Arch 470, Digital Design Studio I (with first Şebnem Yalınay Çinici, then Mine Özkar, and 2012-İpek Gürsel Dino) METU, Department of Architecture.
2003 – Present Arch 381, Environmental Systems I (with Levent Tosun, Ethem Özbakır) METU, Department of Architecture.
2002 Introduction to Finite Element Analysis, Tokyo Institute of Technology
2000 Modal Analysis in Acoustics, Tokyo Institute of Technology, Japan

 

SEMINARS
2014- Present Çevresel Gürültünün Kontrolu ve Denetimi Marie Curie Tunning Projesi kapsamında düzenlenen A1, A2, B1, B2, C1 ve C2 eğitimlerinde seminerler
2013 Tesisat Gürültüsü ve Kontrolu (Plant Noise and Noise Control), Türk Tesisat Muhendisleri Odası (Turkish Chamber of Plant Engineers), Ankara.
2012 Computation and Biomimetics, Tokyo Institute of Technology, japan.
2011 Sürüdürülebilirlik ve Mimarlık Eğitimi (Sustainability and Architectural Education), Mimarlar Odası (Chamber of Architects) Ankara.
2011 Akustik Temel Eğitimi (Acoustics Fundamental Training), Mimarlar Odası (Chamber of Architects) Ankara.
2010 Çevre Yönetimi ve Gürültü Denetimi Paneli (Panel Discussion on Environmental and Noise Control), İstanbul.
2009 Seminars on ‘Çevresel Gürültünün Ölçümü ve Değerlendirilmesi’ (Measurement and Evaluation of Environmental Noise) Fizik Mühendisleri Odası (Chambers of Physics Engineers), Ankara, İstanbul.
2008 Modeling as a Manufacturing Interface, Istanbul Teknik Üniversitesi, 2008.
2007 Mimarlıkta Sayısal Modelleme (Digital Modelling in Architecture), Yıldız Teknik Üniversitesi,  İstanbul.
2005 Mimarlıkta Matematik (Mathematics in Architecture), Yıldız Teknik Üniversitesi, İstanbul
2003 Development of 3-D Mock-up for Auto CAD systems, Tokyo Institute of Technology, Collaboration Engineering Laboratory, Japan.
2002 Design of Origamic Loudspeakers, Tokyo Institute of Technology, Japan.
2000 Sightline Optimization Techniques, Japan Society of Mechanical Engineers, 2000, Japan.
2000 Eyesight Design of Opera Houses, Tokyo Institute of Technology, Collaboration Engineering Laboratory, Japan.
1999 Arzu Gonenc Sorguc(TIT/METU), Development of Efficient Method for Interior Coupled Noise Problem of Large Structure, Special lecture in Research Center of NISSAN Motor Company(1999.3.24)
1999 Temel Akustik Kavramlar ve Uygulama Prensipleri (Fundamenatal Acoustics Concepts and Principles of Application), ; MESA Mesken Konut Sanayi, Turkey.
1998 Konutlarda Gürültü Denetimi (Noise Control in Housings); MESA Mesken Konut Sanayi Turkey.
1993 Chaos Theory And Chaotic Acoustical Systems, Department of Mechanical Engineering METU.
1992 A Review on Acoustics and Noise Control Engineering, Department of Mechanical Engineering METU.
1991 Theory of Active Noise Control And Basic Fields Of Application Department of Mechanical Engineering METU.
1990 Method of Characteristics And Solution Of Pressure Distribution Inside An Infinitely Long Open Ended Pipe By Method Of Characteristics, Department of Mechanical Engineering METU.

Publications

International – Chapter in a Book.

2022 – November, Gönenç Sorguç A., Kruşa Yemişcioğlu M. “Is circularity a measure of complexity in architecture?”, in: Architectures for Next Generation EU Cities, Antonini Ernesto,Gaspari Jacopo, Editor, FrancoAngeli, Milan, pp.249-262

2013 – February, Flexibility in Architectural Education, Cambridge Scholars Publications,  Isbn13: 978-1-4438-4265-5, Editor: Beyhan Bolak Hisarligil, Sevgi Lokce and Oktay Turan.

International Publications— Books.

2010 –February, Arslan S., Gönenç Sorguç A.“A Parametric Approach to Biomimesis: A Proposal for a Non-Dimensional Parametric Interface Design in Architecture”, LAP Lambert Academic Publishing.

2013 – April, Çaglar Firat Özgenel , Arzu Gönenç Sorguç, “New Room Acoustics Tool for Architects: RAT (Room Acoustics Tool)”, LAP Lambert Academic Publishing.

International Publications – Journals (Refereed and Indexed).

2023 – M. Kruşa Yemişcioğlu And A. Gönenç Sorguç, “Mapping Crystal Symmetry into Architecture,” Nexus Network Journal , vol.25, pp.313-319, 2023

2023 – Ö. Çavuş And A. Gönenç Sorguç, “Learning from Folding Paper to Develop Folding Mechanisms,” Nexus Network Journal , 2023

2022 – Sorguç A., Kruşa Yemişcioğlu M., Yetkin O., Demystifying Machine Learning for Architecture Students, Eskişehir Technical University Journal of Science and and Technology A- Applied Sciences and Engineering, vol.23, pp.60-67, 2022

2015‐Gönenç Sorguç A., ‘Dancing With Isometries in Architecture’ Nexus Architecture and Mathematics, Kim Williams Books,17/2, 641–654, 2015.

2015‐Gönenç Sorguç A., Özgenel Ç.F., ‘Proposal of a New Tool for 3D Pattern Generation’ Nexus Architecture and Mathematics, Kim Williams Books, 17/2, pp 655–670, 2015.

2013‐Gönenç Sorguc, A., Arslan Selcuk, S., “Computational Models in Architecture: Understanding Multi‐Dimensionality and Mapping” Nexus Network Journal, Relationships Between Architecture and Mathematics, Kim Williams Books, Turin. Vol.15 No.2 349‐362 (AHCI)

2011‐December, Erdoğan E., Gönenç Sorguç, A., ‘ Hesaplamalı Modeller Aracılığıyla Mimari ve Doğal Biçim Üretim İlkelerini İlişkilendirmek’(Linking Architecture and Natural Form Geneation Principles with Computational Models) METU Journal of Architecture, 28:2, p.269‐281, 2011(2).

2011-December, Özgenel F., Gönenç Sorguç, A., ‘Sayısal Ortamda Tasarımın Deneyimlenmesi için Arayüzlerin Geliştirilmesi: Bir Ön Tasarım Parametresi Olarak Ses’ (Developing an Interface for Experiencing Design in Computational Medium: Sound as a Pre-Design Parameter), METU Journal of Architecture, 28:2, p.248-253, 2011(2).

2009-June, Faucard B., Gönenç Sorguç A., Magoules F., Hagiwara I., “Refining technique for multilevel graph k-partitioning and its application on domain decomposition non overlapping Schwarz technique for urban acoustic pollution”, Journal of the Japan Society for Simulation Technology, pp.17-27, June, Vol.28, No.6.

2009-December, Gönenç Sorguç A., Hagiwara I., Arslan S., “Origamics in Architecture: A Medium of Inquiry for Design in Architecture”, METU Journal of Architecture, 26:2, p.235-247, 2009(2).

2009-Arslan S., Gönenç Sorguç A.,” Altın Oranla Tasarlamak: Doğada, Mimarlıkta ve Yapısal Tasarımda Φ Dizini” (Designing with Golden Ratio: Φ Index in Nature, Architecture and Structural Design)  Trakya Univ J Sci, 10(2):149-157.

2007-June, Arslan S., Gönenç Sorguç A., ‘Mimari Tasarım Paradigmasında Biomimesis’in Etkisi’ (Influence of Biomimesis on Architectural Design Paradigm), Gazi Mimarlık Mühendislik Fakültesi Dergisi, Vol.22, No.2 pp.451-460.

2006‐Gönenç Sorguç A., ‘The Evolving Role of Mathematics in Designing in Digital Medium’ Nexus Architecture and Mathematics, Kim Williams Books, pp. 47‐56, 2006.

Arzu Gönenç Sorguç, “The Role of Mathematics in the Design Process under the Influence of Computational and Information Technologies”, pp. 47‐56 in Nexus VI: Architecture and Mathematics, eds. Sylvie Duvernoy and Orietta Pedemonte Turin: Kim Williams Books, 2006.

2005‐Spring Gönenç Sorguç A., ‘Teaching Mathematics in Architecture’, Nexus Journal special issue on didactics, Vol 7, No.1, pp. 119‐124.

2005‐February, W. Cheng (Tokyo Institute of Technology), Gönenç Sorguç A., (Middle East Technical University), J.Shinoda (Tokyo Institute of Technology), I. Hagiwara (Tokyo Institute of Technology), The Maximum Opposite Angulation for Mesh Construction, Journal of Japan Society of Industrial and Applied Mathematics (JSIAM), Vol.22, No. 1, p. 21‐44.

2005-June Gönenç Sorguç A., ‘Role of System Architecture in Developing New Drafting Tools’, Japanese Society of Mechanical Engineers International Journal, Special Issue: The Latest Frontiers of CAD/CAE/CG, Vol. 28, No. 2, pp. 244-250. 

1999-A.10 Arzu Gönenç Sorguç, Ichiro Hagiwara, Mehmet Çalışkan, Study of Inside Coupled Noise Reduction Under the Presence of Helmholtz Resonators. “Dynamic Design Conference’99 of JSME”, 3, (1999), p.3.

1999-A.9 Arzu Gönenç, Modelling of Sound Fields Inside Acoustically-Structurally Coupled Fields:Part 2. “JSIAM”, (1999).

1999-A.8 Arzu Gönenç Sorguç, Ichiro Hagiwara, Mehmet Çalışkan, Analysis of Sound Fields Inside Acoustically Structurally Coupled Enclosed Spaces Based on Acoustoelasticity. “12 th DDM International Conference”, (1999).

1999-A.7 Arzu Gönenç Sorguç, Ichiro Hagiwara, Quizong Shi, Effect of Source Position on the Sound Fields Insider Acoustically Structurally Coupled Enclosed Spaces Using Holographic Neural Network. “12 th DDM International Conference”, (1999).

1999-A.6 Arzu Gonenç Sorguç, Ichiro Hagiwara, Modelling of Sound Fields Inside Acoustically-Structurally Coupled Sound Fields by a Combined Method. “Computation Mechanics and Domain Decomposition Methods”, (1999), p.4.

1999-Arzu Gönenç, The Effect of Helmholtz Resonator in Acoustoelastically Coupled Spaces and a Comparison Between Resonators and Absorptive Materials in the Coupled System Response. “Next Generation CAD & Modelling Technique in Concurrent Design of JSME”, (1999).

1999-Arzu Gönenç Sorguç, Reshaping of Sound Fields Inside Acoustically Structurally Coupled Enclosed Spaces By Helmholtz Resonators. “Next Generation CAD & Modelling Technique in Concurrent Design of JSME”, (1999).

1999-Arzu Gonenç Sorguç, Ichiro Hagiwara, Quinzong Shi, Mehmet Çalışkan, The Effect of Sound Source Position in the Coupled System Response and Shaping the Coupled Field by Optimizing the Source Position. “Dynamics and Design Conference’99 of JSME”, 3, (1999), p.3.

1999-A.2 Arzu Gönenç Sorguç, Development of Efficient Method for Interior Coupled Noise Problem of Large Spaces. “Special Lecture in Nissan Motor Company”, (1999).

1999-Arzu Gönenç, Development of High/Efficient Performance for Coupled Structural and Acoustic Problem. “1st Conference of Virtual Design Group of TIT VBL”, (1999).

 

National and International Refereed Conferences, Symposiums

2023 – Yetkin, O., Sürer, E., & Sorguç, A., (2023). Collaborating with Agents in Architectural Design and Decision-Making Process: Top-down and Bottom-up Case Studies Using Reinforcement Learning . EAI GOODTECHS 2023 – 9th EAI International Conference on Smart Objects and Technologies for Social Good (pp.1-14). Coimbra, Portugal

2023 – Ayaz Erdağ, A., & Sorguç, A., (2023). Smart Coat: Shape up or Ship out . Digital Architecture Research Conference DARe, Bialystok, Poland

2023 – Nas, M. O., & SORGUÇ, A., (2023). 4D Printing of Hygroscopic Wood Based Actuators for Climate Responsive Skin . 41st Conference on Education and Research in Computer Aided Architectural Design in Europe, eCAADe 2023 (pp.439-448). Graz, Austria 

2022 – Kruşa Yemişcioğlu M., Gönenç Sorguç A., Yetkin O., Levels of Mapping in Nature-informed Studies A Case Study on Informed Wall, 40th Education and Research in Computer Aided Architectural Design in Europe (eCAADe) Conference, Ghent, Belgium, 13 – 16 September 2022, vol.1, pp.271-280

2022 – Sorguç A., Kruşa Yemişcioğlu M., Hagiwara I. “Origami to Decode Folding Strategies in Nature”. WCCM-APCOM

2022: 15th World Congress on Computational Mechanics & 8th Asian Pacific Congress on Computational Mechanics, Yokohama, Japan, 31 July – 05 August 2022

2022 – Sorguç A., Kruşa Yemişcioğlu M., Yetkin O. “Demystifying Machine Learning for Architecture Students”. Mimarlıkta Sayısal Tasarım Ulusal Sempozyumu, Eskişehir, Turkey, 22 – 26 June 2022

2022 – Sorguç A. , Kruşa Yemişcioğlu M. “Is Circularity a Measure for Complexity in Architecture?”. NEXTBUILT 2022: International conference on Challenges for the Next generation Built environment, Bologna, Italy, 13 May 2022

2022 – Sorguç A., Topak S. Ç. , Messner J. I. “A component-oriented strategy for building digital design using a product architecture”. Next-Built 2022: Challanges for Next Gen Built Environment, Bologna, Italy, 13 May 2022

2021 – Çavuş Ö., Sorguç A. “Symmetry groups for understanding and interpreting structural grids of kinetic skins in architecture”. Mimarlıkta Sayısal Tasarım XV. Ulusal Sempozyumu, İstanbul, Turkey, 28 – 29 June 2021, pp.125-134

2021 – Sönmez A., SORGUÇ A. “Computer-Aided Fabrication Technologies as Computational Design Mediators”. 39th International Conference on Education and Research in Computer Aided Architectural Design in Europe, eCAADe 2021, Novi-Sad, Serbia, 8 – 10 September 2021, vol.1, pp.465-474

2020 – Sorguç A. , Yetkin O. , Kruşa Yemişcioğlu M. “Sayısal Tasarım Araçlarının kışı mı geliyor? : Is the Winter of Computational Design Tools Coming?” MSTAS2020: Mimarlıkta Sayısal Tasarım Ulusal Sempozyumu, Trabzon, Turkey, 24 October 2020, pp.12-20

2019 – Yetkin, O., Gönenç Sorguç, A. “Design Space Exploration of Initial Structural Design Alternatives via Artificial Neural Networks”. eCAADe (Education and research in Computer Aided Architectural Design in Europe) 2019, Porto, Portugal, 11 – 13 Eylül 2019

2019 – Gönenç Sorguç, A., Özgenel, Ç.F., Kruşa Yemişcioğlu, M., Küçüksubaşı, F., Yıldırım, S., Antonini E., Bartolomei, L., Ovesen, N., Steino, N. “STEAM Approach for Architecture Education”, eCAADe+SIGraDi Conference 2019, Porto.

2019 – Gönenç Sorguç, A., Kruşa Yemişcioğlu, M., Özgenel, Ç.F. “A Computational Design Workshop Experience for 21st Century Architecture Education”, eCAADe+SIGraDi Conference 2019, Porto.

2019 – Gönenç Sorguç, A., Kruşa Yemişcioğlu, M., Özgenel, Ç.F. “Sayısal Tasarım Eğitiminde Doğa Öğrenili Mimarlık (Nature-Informed Architecture in the Computational Design Education), XIII. MSTAS, Kocaeli.

2018 – Gönenç Sorguç, A., Kruşa Yemişcioğlu, M., Özgenel, Ç.F. “Architecture 4.0: A New Manifestation of Contemporary Technology “, International Conference on Digital Transformation & Smart Systems,  Ankara.

2018 – Gönenç Sorguç, A., Kruşa Yemişcioğlu, M., Özgenel, Ç.F. “Multiverse of a Form: Snowflake to Shelter”, eCAADe 2018, Lodz.

2018 – Kruşa Yemişcioğlu, M., Gönenç Sorguç, A., Özgenel, Ç.F. “Crystal Formations and Symmetry in the Search of Patterns in Architecture”, eCAADe 2018, Lodz.

2018 – Özgenel, Ç.F., Gönenç Sorguç, A. “Performance Comparison of Pretrained Convolutional Neural Networks on Crack Detection in Buildings”, ISARC 2018, Berlin.

2018 – Küçüksubaşı, A.; Gönenç Sorguç, A. “Transfer Learning-Based Crack Detection by Autonomous UAVs”, 2018 Proceedings of the 35th ISARC, Berlin, Germany, pp. 593-600, Berlin, 20-25 July 2018

2017 –  Gönenç Sorguç, A., Kruşa Yemişcioğlu, M., Özgenel, Ç.F., Katipoğlu, M. O., Rasulzade, R. “The Role of VR as a New Game Changer in Computational Design Education”, eCAADe 2017, Rome.

2017 – Gönenç Sorguç, A., Özgenel, Ç.F., Küçüksubaşı, F., Kruşa Yemişcioğlu, M., Ülgen S. “Mimarlık Eğitiminde Tepkimeli Kinetik Sistem Taklaşımı” (Responsive Kinetic System Approach in Architectural Education), XI. MSTAS, Ankara.

2016-June, Gönenç Sorguç,A., Özgenel,F., Kruşa,M.,Küçüksubaşı,F., Ülgen, S. “Biçim Arayışında Sayısal İmalat/Üretim Teknolojilerin Dönüştürücü Gücü”(Transformative Power of Digital Manufacturing/Production Technologies in Form Finding), X. MSTAS, İstanbul.

2013‐November 26‐28, ‘Mathematics and Architecture’ Invited Speaker, Mathematical Modeling and Applications (ICMMA2013 November26to28, 2013, Meiji University, Tokyo Japan.

2012-July, Özgenel F., Gönenç Sorguç, A., “A New Method of Curve Fitting for Calculating Reverberation Time From Impulse Responses With Insufficient Length”, Internoise 2012 New York City.

2011-June, Gönenç Sorguç, A., Cakıcı Z., New Level of Precision in Architecture, the 2 nd International Symposium on Computing in Science & Engineering (ISCSE 2011), Gediz University the Faculty of Engineering and Architecture, Kuşadası, Aydýn, 1-4 June 2011.

2011-September, Gönenç Sorguç, A., Selçuk, S.A., Çakıcı, F.Z., Computer Simulation as an Integral Part of Digital Design Education in Architecture, Education and Research in Computer Aided Archtectural Design in Europe (eCAADe 2011), University of Ljubljana, Faculty of Architecture, Ljubljana, Slovenia, September 21-24.

2010-June, Gönenç Sorguç, A., Arslan Selçuk, S., A Sustainable Transformation on Construction Process: From Scale Models To The End Product 1st International Conference of Sustainable Life In Manufacturing (SLIM 2010), Isparta, 24-26 June 2010.

2009-May, Gönenç Sorguç A., “Sürdürülebilirlik için Performatif Mimarlık” (Performative Architecture for Sustainability), Ekolojik Yapı Tasarımı, Malzeme, Teknoloji ve Çevre Sempozyumu (Symposium on Ecological Structural Design, Material, Technology and Environment), 7-8 Mayis 2009, TMMOB İstanbul.

2009-May, Gönenç Sorguç A., Özkar M., Uçar B., Arslan S., “Planing Curriculum Elements For an Integration of Digital Design Knowledge to Design Thinking”, MİMED Mayıs 2009, Kayseri.

2009-July, Gönenç Sorguç A., “Bilgisayarak Öğrenmek, Bilgisayarla Öğrenmek” (Learning by Computation, Learning with Computers), 16. Sosyal Psikiyatri Kongresi (16thSocial Psychiatry Congress), p. 120-123, 4-8 Temmuz 2009, Safranbolu.

2009-September, Gönenç Sorguç A., Arslan S., “Art and Literature as a Teaching/Learning Interface of Mathematics for Students of Architecture, ECAADE 2009 September 2009, pp. 465-472, Istanbul.

2009-September, Arslan S., Gönenç Sorguç A., Exploring Complex Forms in Nature through Mathematical 2009-September, Modeling: A Case of Turritella Terebra, ECAADE 2009, September 2009, pp. 665-672, Istanbul.

2009-October, Gönenç Sorguç A., Arslan S., “Sürdürülebilirlik için Performatif Mimarlık” ” (Performative Architecture for Sustainability), Uluslararası Ekolojik Mimarlık ve Planlama Sempozyumu (International Symposium on Ecological Architecture and Planning), pp. 132-136, Antalya Türkiye, Ekim 2009.

2009-October, Çakıcı Z., Gönenç Sorguç A., Kısıtlayıcı Değil, Hedef Direktifler” (Target Directives, not Limiting), Uluslararası Ekolojik Mimarlık ve Planlama Sempozyumu (International Symposium on Ecological Architecture and Planning), pp. 144-149, Antalya Türkiye, Ekim 2009.

2007-March, Gönenç Sorguç A., ‘Gulliver’dan Greg Lynn’e Mimarlikta Matematik’ (Mathematics in Architecture from Gullivre to Greg Lynn), Mimarlık Eğitiminde Bütünleşik Yaklaşımlar, Bilgisayar Destekli Tasarım  Sempozyumu (Symposium on Holistic Apporaches, Computer Adided Design in Architecture), 23 Mart 2007, ODTÜ, Ankara.

2007- Arslan S., Gönenç Sorguç A., ‘Ekolojik Mimarlık Çalışmalarında doğanın En İyi Fikirlerinden Öğrenmek’ (Learning from Best Ideas of Nature in Ecological Architecture), 2007-April, Ekolojik Mimarlık ve Planlama Sempozyumu (Symposium on Ecological Architecture and Planning), pp. 147-151, 27-28 Nisan 2007 Antalya

2006-June, Gönenç Sorguç A., Arslan S., ‘Yapay Zeka Araştırmaları ve Biomimesis Kavramlarının Günümüzde Mimarlık Alanındaki Uygulamaları: Akıllı Mekanlar’ (Applications of Artifical Intelligence and Biomimesis Concepts in Contemporary Architecture), Yapı ve Kentte Bilişim IV. Kongresi (IV. Congress on Informatics in Structure and City), pp.75-80, Haziran 2006.

2006- Arzu Gönenç Sorguç, The Role of Mathematics in the Design Process Under the Influence of Computational and Design Technologies. “Nexus Architecture and Mathematics”, 1, (2006), p.47-56.

February-2005, W. Cheng (Tokyo Institute of Technology), Gönenç Sorguç A., (Middle East Technical University), J.Shinoda (Tokyo Institute of Technology), I. Hagiwara (Tokyo Institute of Technology), The

2004-April, Arslan S., Gönenç Sorguç, A., ‘Biomimesis in Architecture: Inspiration for Next Generation Po®table Buildings’, Transportable Environments 3 Conference, pp. 200, April 8, 2004, Toronto Canada.

2004-June, Arslan S., Gönenç Sorguç A., ‘Similarities Between Structures in Nature and Man-Made Structures: biomimesis in architecture’, Design and Nature Conference II, pp.45-55., June 2004, Rodos, Greece.

2004-June, W. Cheng (Tokyo Institute of Technology), Gönenç Sorguç A., (Middle East Technical University), J.Shinoda (Tokyo Institute of Technology), I. Hagiwara (Tokyo Institute of Technology), MOAA and Topology Judgement for Mesh Construction, ASME/JSME Pressure Vessels snd Piping Conference: Computer Technology and Applications, PVP Vol. 482, pp.238., June 2004.

2003-November, Kakuuchi, H., Gönenç Sorguç, A, Hagiwara, I., ‘The Design of radiation of Sound  of Structure’ the 16 th Computational Mechanics Conference, pp.1015-1017, November 2003.

2002-November, O.Egorova (Tokyo Institute of Technology), A.G. Sorguc (Middle East Technical University, Ankara-Turkey), I.Hagiwara (Tokyo Institute of Technology), Automatic Mesh Enhancement by Control of Aspect Ratio, the 15 th Computational Mechanics Conference, pp.731-732, November 2002.

2002-November, O. Egorova, A.Gonenc, M.Savchenko, J.Shinoda and I. Hagiwara, “Study on Precision of Mesh Enhancement”, In Proceedings of the 16th Computational Mechanics Conference of JSME, pp. 1021-1022, Kobe, Japan, Nov. 2003

2002-Octoober, A.Gönenç Sorguc (Middle East Technical University, Ankara-Turkey), O.Egorova (Tokyo Institute of Technology), I.Hagiwara (Tokyo Institute of Technology), An Aspect Ratio Controlled New Mesh Enhancement Method Based on Statistical Mathematics, the 5 th Optimization Conference, pp.235-240, October 2002.

2002-September, A.Gönenç Sorguc (Middle East Technical University, Ankara-Turkey), H.Takahashi (Nissan Motor Car Company), I.Hagiwara (Tokyo Institute of Technology), Simulation of Car Cruise from Motion History, Proceedings of The 2002 annual conference of the Japan Society for Industrial and Applied Mathematics JSIAM2002 (Japan, Tokyo, September 19-21, 2002).

2002-September, A.Gönenç Sorguc (Middle East Technical University, Ankara-Turkey), O.Egorova (Tokyo Institute of Technology), I.Hagiwara (Tokyo Institute of Technology), Distribution Control of Aspect Ratios and Automatic Generation of Surface Meshes, JSIAM Anniversary Conference, September 2002.

2002-July, A.Gönenç Sorguc (Middle East Technical University, Ankara-Turkey), Development of Automatic Mesh Enhancement Based on Monte Carlo Simulation, JSME Advanced Meeting, July 2002.

1999-Arzu Gonenc(TIT/METU), Modeling of Sound Fields Inside Acoustically-Structurally Coupled Fields by A Combined Method/Part II, Research Committee of DDM Sponsored by JSIAM(1999.2.20).

1999-October, Arzu Gonenc Sorguc (Middle East Technical University, Ankara-Turkey), Ichiro Hagiwara(Tokyo Institute of Technology: TIT),Qinzhong Shi(TIT) and Junichi Shinoda(TIT),Effect of Source Posıtıon on the Sound Fıelds Insıde Acoustıcally Structurally Coupled Enclosed Spaces Usıng Holographıc Neural Network, The 12th  DDM International Conference(1999.10).

1999-October, Arzu Gonenc Sorguc(Middle East Technical University, Ankara-Turkey) , Ichiro Hagiwara(Tokyo Institute of Technology: TIT), Mehmet Caliskan(Middle East Technical University) and Junichi Shinoda(TIT), Analysıs of Sound Fıelds Insıde Acoustıcally Structurally Coupled Enclosed Spaces Based on Acoustıc-Elastıcıty, The 12th  DDM International Conference(1999.10).

1999-March, A.Gönenç Sorguc, I.Hagiwara and M. Caliskan, Study Of Inside Coupled Noise Reduction Under The Presence of Helmholtz Resonators, Proceedings of Dynamics and Design Conference’99 of JSME,(1999-3), pp707-710.

1999-March, A. Gonenc Sorguc,  I.Hagiwara, Q. Shi and Mehmet Caliskan: The Effect of Sound Source Position in The Coupled System Response and Shaping The Coupled Field by Optimizing The Source Position, Proceedings of Dynamics and Design Conference’99 of JSME,(1999-3),pp207-209.

1999 January, Arzu Gonenc Sorguc(TIT/METU) and I. Hagiwara(TIT), Modeling of sound fields inside acousitcally-structurally coupled fields by a combined method, Symposium of Computation Mechanics and Domain Decomposition Methods, Sponsored by Japanese Ministry of Education and Research Institute for Mathematical Sciences of Kyoto University, Kyoto, Japan (January 18–20, 1999).

1999-January, Arzu Gonenc Sorguc(Middle East Technical University Dept. of Architecture, Ankara-Turkey) The Effect of Helmholtz Resonators in Acoustoelastically Coupled Enclosed Spaces, and a Comparison Between Resonators and Absorptive Materials in the Coupled System Response, Research Committee on Next-Generation CAD &Modeling Technique in order to Realize Concurrent Design & Development of JSME(1999.1.29).

1998-December, Arzu Gonenc(TIT/METU), Development of High/Efficient Performance for Coupled Structural and Acousty Problem, First Conference of Virtual Design/Manufacturing Group of TIT VBL (1998.12.25)

1998-December, Arzu Gonenc Sorguc(METU), Reshaping of Sound Fields Inside Acoustoelastically Coupled Enclosed Spaces By Helmholtz Resonators, Research Committee on Next-Generation CAD &Modeling Technique in order to Realize Concurrent Design & Development of JSME (1998.12.1).

1999-March, A. Gönenç Sorguc, I. Hagiwara and M.Caliskan: Analysis of Sound Fields Inside Acoustically-structurally Coupled Enclosed Spaces Excited by Structural and/or Acoustical Means; Proceedings of TITech COE/Super Mechano-Systems Workshop ’99 (1999-3), pp.324-331.

1998-February, A.Gönenç Sorguc, M.Caliskan, ‘Active Minimization of Acoustic Potential Energy Inside Acoustoelastically Coupled Enclosed Spaces’, proceedings of the Australasian Conference on Structural Optimization, February 11, 1998, pp.621-627, Sydney-Australia.

1992-March, A. Gönenç, M. Çaliskan, Analysis of forced acoustic fields inside structurally coupled cavitiesproceedings of Second International Congress on Air and Structure Borne Sound and Vibration, ALABAMA-USA, pp.651-658, March 1992

1993-September, A. Gönenç, M. Çaliskan, Active minimization of acoustic potential energy inside structurally coupled enclosures: an analytical approach, proceedings of Inter-noise 93, LEUVEN-BELGIUM, pp.785-788.

National Publications –  Journals and Magazines (with Editorial Board)

2020- Sorguç A. , Kruşa Yemişcioğlu M.. “Fabrication Technologies in Architecture and Industry/Architecture 4.0”  Dosya 45: Gelecek, Teknoloji ve Mimarlık, no.45, pp.6-17, 2020 

2016- Arzu Gönenç Sorguç, Sesi Camla Yalıtmak. “XXI”, 151, (2016), p.34-35.

2016- Arzu Gönenç Sorguç, Tasarım Odaklı Düşünme. “Odtülü”, (2016), s.36-40.

2016- Arzu Gönenç Sorguç;Semra Arslan Selçuk, Sınırlanmıştan Sınıra Sınırdan Arayüze Sayısaldan Fiziksele. Mimarlık Dergisi 388 [http://www.mimarlikdergisi.com/index.cfm?sayfa=mimarlik&DergiSayi=402&RecID=3875] , (2016).

2015- Arslan Selçuk S., Gönenç Sorguç A. (2015) “Bilgisayar Ekranından Şantiyeye”(From Computer Screen to Construction Site) Yapı Dergisi v.407

2012-April, Gönenç Sorguç, A., “Matematiğin Mimarlığı, Mimarlıkta Matematik” (Architecture of Mathematics, Mathematics in Architecture), Arredemento Mimarlık Sayı 256, p. 67-72, Nisan 2012.

2010-Spring, Gönenç Sorguç A., “Mimarlıkta Sayısal Teknolojilerin Kullanımı: Yeni Teknolojiler ve Hibridleşen Malzemeler” (Use of Digital Technologies in Architecture: Emerging Technologies and Hybridization of Materials), Mimarlıkta Malzeme Dergisi, pp. 41-46, Year 5, No 15, Spring 2010.

2009-May, Gönenç Sorguç A., “Doğadaki Süreçleri Anlamak İçin Bir Arayüz: Sayısal Teknolojiler, Sayısal Düşünme ve Tasarlama” (An Interface for Understanding Processes in Nature: Digital Technologies, Digital Thinking and Design), Arredamento Mayıs 2009.

2009- Arslan S., Gönenç Sorguç A., Er A., Altın Oranla Tasarlmak: Doğada, Mimarlıkta ve Yapısal Tasarımda Φ Dizini. ” Trakya Univ Journal of Science”, 10(2), (2009), s.149-157.

2007- Arslan Semra, Gönenç Sorguç Arzu, ‘Mimari Tasarım Paradigmasında Biomimesis’in Etkisi’. “Gazi Mimarlık Mühendislik Fakültesi Dergisi”, Vol.22, (2007), s.451-460.

1989-A. Gönenç Sorguç, M. Çaliskan, Sesin sesle etkin denetimi üzerine yayin taramasi (Literature Review on Effective Sound Control with Sound), Tubitak Doğa Dergisi, 1989.

National Publications- Chapter in a Book

2016- Arzu Gönenç Sorguç, Arazide Kritik Noktalarda Gürültü Ölçümlerinin Yapılması ve Gürültü Kontrolü. “Bütünleşik Bina Tasarımı Yaklaşımı ile Proje Geliştirme Sürei Uygulama Kılavuzu”, (2016).

Refereeing, Scientific Committees– Journals, Conferences and Academic Competitions.

Journal of Automation in Construction / Reviewer

IEEE Access / Reviewer

eCAADe (Education and research in Computer Aided Architectural Design in Europe) Conferences, Scientific Committee.

ACADIA (Association for Computer Aided Design in Architecture) Conference, Scientific Committee.

La Sociedad Iberoamericana de Gráfica Digital (SIGRADI) Conference, Scientific Committee.

MSTAS (Computational Design Research in Architecture Symposium), Scientific Committee.

CAAD Futures, Scientific Committee.

METU JFA (Journal of Faculty of Architecture), Refereeing.

MEGARON (Yıldız Technical University Faculty of Architecture e-journal), Refereeing.

ICLAUD, Scientific Committee.

TUBITAK (The Scientific and Technological Research Council of Turkey), Project Referee.

The 2nd International Symposium on Computing in Science & Engineering (2nci Uluslararasi Temel Bilimler ve Mühendislikte Hesaplamalar Sempozyumu) (ISCSE 2011) Scientific Committee.

The 1st International Symposium on Computing in Science & Engineering (1nci Uluslararasi Temel Bilimler ve Mühendislikte Hesaplamalar Sempozyumu) (ISCSE 2010) Scientific Committee.

Gazi Üniversitesi Mühendislik Mimarlik Fakültesi Dergisi, Refereeing.

Nexus Mathematics and Architecture Journal Refereeing.

CIB Student Conference, Scientific Committee.

NEXUS Journal, Didactics Special Issue, Refereeing.

METU BAP (Bilimsel Araştırma Projeleri – Scientific Research Projects)

RESEARCH PROJECTS
10.2020 – … Emergence of Creative Industries and Transformation of Gaming, Wearables and New Generation Film Production (ECITE) -IPA Project
02.2021 – 03.2023 Hesaplamalı Yöntemler ve Yapay Zeka Destekli Tasarlanmış Akustik Performatif Üretken Panel Sistemleri
GAP-201-2021-10742
Project Coordinator / METU
10.2019 – 11.2019 Expo 2020 Qazaqstan Pavilion Acoustics Consultancy
(2019-16-67-2-00-01)
Consultancy 
05.2018 – 05.2019 Noise Removal with Generative Adversarial Networks for Building Documentation
GAP-201-2018-2825
Project Coordinator / METU
01.2017 – 12.2018 Greening the Skills of Architecture Students via STEAM Education (ARCHISTEAM)
EU Project Erasmus + KA2 2016-1-TR01-KA203-034962
Project Coordinator / METU
05.2016 – 06.2016 Istanbul New Airport Steel Construction
Consultant
02.2015 –12.2017 Design of Curriculum for Woodworking CNC Operators in Turkey
EU Project Erasmus + KA2 2014-1-TR01-KA200-013304
Project Coordinator / METU
01.2016 – 12.2017 Teknoloji, tasarım ve inovasyon merkezi destek hizmetleri projesi. BAP-1 BAP-1 , 1 JANUARY 2016 – 1 DECEMBER 2017. Local Coordinator .
2015 Technical Assistance for Implementation Capacity for Environmental Noise Directive. Projects funded within the scope other international institutions Other EU Twining project, 1 SEPTEMBER 2015 – 1 OCTOBER 2015. Researcher .
02.2014 – 12.2016 Gişe Geçişleri İçin Aktif Gürültü Bariyeri (Active Noise Barrier for Toll Booths)
SanTez – 0553.STZ.2013-2
Project Coordinator/ METU
09.2013 Tokyo Meiji University, Tokyo Shibuya Station and District BEM and VR Model
2013 İstanbul Modern, Yeni Mimarlık Programı (New Architecture Programme) “Speaker”, finalist, Design Group: Evren Başbuğ, İnanç Eray, Meriç Kara
Acoustic Project Consultancy.
07.2013 –03.2014 METU Campus Vertical and Horizontal Noise Mapping
BAP – 0811- DPT.2013K120500-3.
Project Coordinator / METU
06.2012 –01.2013 Hacettepe University Conservatory Building Acoustical
Consultant
04.2012 – 08.2012 Türkiye Büyük Millet Meclisi (Turkish National Assembly of Turkey)
Acoustical Consultancy
Project Researcher
05.2012 – 07.2012 Türk Telekom Çağrı Merkezi Gürültü Azaltımı (Türk Telekom Call Center Noise Reduction), 2012-02-01-1-0011
Project Researcher
2012 Noise Control of Yunus Emre Power Plant, “Yunus Emre Elektrik Santralı Kaplama Detayının Ses Yalıtımı Değerlendirmesi”, 2012-02-01-1-0003
04.2012 – 08.2012 Türkiye Büyük Millet Meclisi (Turkish National Assembly of Turkey) Acoustical Consultancy
Consultant
2010 Acoustical Design of Tevfik Fikret Lisesi Concert Hall,
Project Consultant
2010 – 2011 Acoustical Design of Astana Media Center’ Project Consultancy
2010 – 2011 ‘Acoustical Design of Fatih Yeni Kapı Culture Center’ Project Consultancy
2009 ‘Development of Computational Design Interface’, BAP-02-01-2009-01.
2009 Sayısal Tasarım ve Üretim Araştırmaları Laboratuarı. BAP-1 (Excluding thesis supports) , 1 JANUARY 2009 – 1 DECEMBER 2009. Local Coordinator .
2008 ‘Evaluation of Anechoic Room for Medical Testing on Hearing Impairments’, Ankara University, Medical School.
2008 – 2009 ‘Acoustical Design of New York State University, Abu Dabi, Project
2007 – 2008 ‘Development and Integration of Turkish Consruction Platform to European Union Construction
BAP-2007-02-01-02.
2006 – 2007 ‘Osman Gazi Üniversitesi, Congress and Culture Center, Acoustical Design Project.
2005 – 2006 ‘Use of Wind Energy in High Rise Buildings (Yüksek Binalarda Rüzgar Enerjisi Kullanımı) TÜBİTAK Project Consultancy.
2005 – 2006 ‘Mimarlık Fakültesi Bilişim Alt Yapısını Destekleme Projesi’ (Support for Informatics Infrastructure of Faculty of Architecture), BAP 2005-02-01-04.
2007 Faculty of Architecture MATPUM Building Mechanical Systems Consultancy.
2007 Türk Yapı Sektörü’ nün Avrupa Birliği Ülkelerindeki Yapı Sektörleri ile Karşılaştırılması ve Avrupa Birli. BAP-1 (Excluding thesis supports) , 1 JANUARY 2007 – 1 DECEMBER. Local Coordinator .
2005 Yüksek Binalara Rüzgar Enerjisi Kulanımının Entegrasyonu. Tübitak, 1 SEPTEMBER 2005 – 1 JUNE 2006.
Researcher
2005 Acoustical Design of Multi-purouse Auditorium of METU Cyprus Campus. metu, 1 JANUARY 2005 – 1 JULY 2005. Coordinator .
2005 – March ‘CHP New Building Acoustical Design’ Project.
2005 Mimarlık Fakültesi Bilişim Alt Yapısını Destekleme ve Yenileme Projesi. BAP, 1 JANUARY 2005 – 1 DECEMBER 2005.
Coordinator
2004 – April ‘Acoustical Design of Turkish Patent Institute’ Project.
2004 Deniz Kabuklarında Mimariyi Aramak: Kabuk Yapılarda Deniz Kabuklarının Biomimmetic Değişimi. BAP-DPT, 1 JANUARY 2004 – 1 DECEMBER 2004.
Coordinator
2004 – 2007 ‘Biomimesis Kavramıyla Mimarlıkta Yeni Nesil Teknoloji Hafif Taşıyıcı Sistemlerin Araştırılması’(Research on New Generation Lighweight Load-bearing Systems in Architecture in relation with Biomimesis), ÖYP Project.
2004 ‘METU-Cyprus Campus, Acoustical Design of Auditorium’.
1997 – 1998 ‘Kapalı Mekanların Akustik Özelliklerinin Bilgisayar Benzetisimli Modellenmesi’ (Computer Simulated Modelling of Acoustics of Indoor Spaces), AFP Project-97-02-01-07.

ORGANIZATIONS: CONFERENCES, SEMINARS, EXHIBITIONS AND WORKSHOPS
07.12.2018 Seminar – Mimarlık Eğitiminde “Steam” Yaklaşımı
(STEAM Approach in Architectural Education)
Member of Organizing Team, Presenter
7.01.2019 Antalya Büyükşehir Belediyesi Gürültü Eğitimi için Müfredat Geliştirilmesi Erasmus K2 Projesi kapsamında düzelenen panel, key expert.
25-27.09.2018 Cocoon: A Computational Design Workshop
Member of Organizing Team, Tutor
15-16.06.2017 MSTAS.2017: 11. Mimarlıkta Sayısal Tasarım Ulusal Sempozyumu (National Symposium of Computational Design in Architecture), mstas2017.metu.edu.tr
Member of the Organizing Committee 
22.10-20.11.2016 3. Istanbul Design Bienale
Contributor
09-12.06.2014 Nexus2014: Relationship between Mathematics and Architecture. 
Conference organizing committee member
10-13.05.2013 Aggregated Workshop
Organizer
05.2012 Fabric Forms
11.2012 İKSV 3 Millimeters – 3 Meters – 3 Kilometers
Contributor
06-09.12.2012 Parametric Design Workshop
Organizer
06.2007 TYTP Pro Launch
Conference Organization and keynote Speaker.
11.2007 ECTP Conference ‘Turkish Construction Platform’, 19-20, 2007, Amsterdam, The Netherlands.
2002 JACM (Japan Association for Computational Mechanics), Minisymposia organized at WCCM6 Beijing, New Methods Developed for CAD/CAE Systems, Ichiro HAGIWARA(hagiwara@mech.titech.ac.jp),Zheng-Dong MA(mazd@engin.umich.edu),

THESIS COMPLETED
2023 Mustafa Sina Karaoğlu, Explainability of Generative Ai for Architecture: Investigating the Alignment with Design Intentions, M.Sc.
2023 Atike Yağmur Köseoğlu, Study on Green Building Rating Systems to The Circularity Principles, M.Sc.
2023 Mehmet Oğuz Nas, 4D Printing of Hygroscopic Wood Based Actuators for Climate Responsive Skin, M.Sc.
2023 Handan Akyürek, Following User Traces in Urban Context: Stigmergic Approach and A Machine Learning Implementation, M.Sc.
2022 Asli Zeynep Doğan, Sound Perception in Virtual Environments, M.Sc.
2022 Şevval Çöloğlu, Structural Transformation: Designing Structural Building Elements Informed from Bone Morphology, M.Sc.
2022 Alireza Maali Esfangareh, Adopting Ai Techniques in Robotic Fabrication In Architecture: Intelligent Robotic Bricklaying Using Reinforcement Learning Algorithms, M.Sc.
2022 Kubilay Şahinler, Modelling an Architectural Design Process, M.Sc.
2021 Ayça Sönmez, An Intelligent Design Approach Trained by Fabrication Techniques , M.Sc.
2021 Ayşe Zeynep Öziş, Form Driven, Adaptive and Reusable Tunnel Formwork for Customized Mass Housing, M.Sc.
2021 Müge Kruşa Yemişcioğlu, Nature-informed Architecture (NiA): Learning from Defects in Crystals, Ph.D.
2020

Ozan Yetkin, Design-Objective Space Exploration and Multi-Objective Optimization of Initial Structural Design Alternatives via Machine Learning Approach, M.Sc.

2019 Tuna Torun, An Approach on Determining Optimum Acoustic Conditions for Turkish Classical Music, M.Sc.
2019 Eren Güney, A New Game-Based Immersive Virtual Learning Tool for Perceiving Behaviour of Structures: Structurepuzzlevr, M.Sc.
2019 Özlem Çavuş, Learning from Folding for Design in Kinetic Structures in Architecture, M.Sc.
2019 Gizem Yetiş, Auto- Conversion from 2D Drawing to 3D Model with Deep Learning, M.Sc.
2019 Zelal Öztoprak, A biomimetic perspective on (retro) fitting of building envelopes, Ph.D.
2018 – June Orkun Sönmez, Implementing and Evaluating an Immersive Virtual Learning Environment for Learning How to Design in Human-Scale, M.Sc.
2018 – May Çağlar Fırat Özgenel, Crack Detection with Deep Learning: An Exemplary Study of Data Design, Ph.D.
2018 – February Zelal Öztoprak, A Biomimetic Perspective on (Retro)Fitting of Building Envelopes, Ph.D.
2017 – December  Fatih Küçüksubaşı, An Integrated System Design for Building Inspection by Autonomous UAVs, M.Sc.
2016 – June Serkan Ülgen, A New Active Control Application for Reduction of Environmental Noise in Open Spaces, M.Sc.
2015 – May Ayşegül Akçay Kavakoğlu, Repositioning Moving Image in Computational Design Education, Ph.D.
2014 – March Javier Zarategui, Intelligent Design Objects Applied to the Spatial Allocation Problem, M.Sc.
2014 – March Bilge Göktoğan, Adaptable Network Generator (ANG) : A Generative System Proposal with respect to Temporal Space Design, M.Sc.
2013 – September Müge Kruşa, Human Crowd Simulation as an Evaluation Tool for Generative Temporary Site Organization, M.Sc.
2013 – February Fatma Zehra Çakıcı “Proposal of an Interactive Interface Guiding Design of Buildings Considering Energy as the Performance Criterion”, Ph.D.
2012 – February Çağlar Fırat Özgenel,  Developing a Tool for Acoustical Performance Evaluation Throughout the Design, M.Sc.
2012 – February Elif Erdoğan , The Common Computational Principles in Biological and Architectural Form Generations, M.Sc., ,
2011 – February Gonca Yıldırım, Performance Halls and Their Acoustical Performance in Early Republic Period: Three Cases Resim Heykel Müzesi, Küçük Tiyatro,  Opera,  M.Sc.,  Gonca Yıldırım, February 2009-2011.
2009 – February Semra Arslan The Relation Between Nature and Architecture: A Mathematical Point of View to Biomimesis, Ph.D.
2008 – January Bahadır Çalışkan, Controlling Noise in Shoping Malls, the Sound in Dining Area and Circulation Gallery, M.Sc.,
2008 – June Sevda Özkan, The Way Architectural Design Talks with Machines, M.Sc.
2006 – June Tansu Yılmaz, Design of Reflectors for Concert Halls, M.Sc.
2003 – June Mehmet Şaşmaz, Relation Between Surface Topology and Sound Propagation: Urban System Models, M.Sc.
2001 – February Konca Şaher, Sightline Optimization and Computer Simulation, M.Sc.
1999 – July Özgür Çakır, A study on Out-Door Sound Propagation: A Computer Implementation to Predict Sound Pressure Level in Open-Air, (Co-Supervisor), M.Sc.

PANELIST/SPEAKER
2022

Doktora Atölye Seminerleri: Doğa-Bilgili Hesaplamalı Tasarım, Invited Speaker, Kocaeli University, Turkey

2022

Dönüşüm Panelleri #1, Invited Speaker, Vestel, Turkey

2022

IWD 2022, Invited Speaker, IWDcon (Inspiring Women in Digital Construction), Turkey

2022

Sürdürülebilir Gelecek İçin Kadın Projesi 2022, Invited Speaker, PMI (Project Management Institute) Türkiye, Turkey

2021

International Conference on Design of Comfortable Life using Mathematical Sciences, Invited Speaker, Meiji Institute for Advanced Study of Mathematical Sciences (MIMS), Japan

2020

İyi Tasarım / Good Design İzmir 5, Invited Speaker, İzmir Büyükşehir Belediyesi, Turkey

2020

Mimarsan Bilirsin: 250 Serisi, Invited Speaker, Arkitera, Turkey

2019 DIGITAL&BIM ITALIA International Conference, Panelists, Bologna, Italy
2019 Architecture for Four, Altınbaş Üniversitesi, Invited Speaker, İstanbul, Turkey
2019 VII. ZEKA VE YETENEK KONGRESİ, Invited Speaker, Ankara, Turkey
2019 OIST funded Workshop, “Origami and Deployable Mechanisms (ODM)”, Invited Speaker, Okinawa, Japan
2019 BIM4Turkey: Mimarlık Eğitim ve Uygulamalarında Bütünleşik -Tasarım, İnşaat, ve Yönetim- Teknolojileri Semineri, Invited Speaker, İstanbul, Turkey
2019 Antalya Büyükşehir Belediyesi Gürültü Eğitimi için Müfredat Geliştirilmesi (Erasmus KA2 Projesi), Panelists, Antalya, Turkey
ARZU GÖNENÇ SORGUÇadmin